Transfer Switches and Load Center for Generac Guardian Generators

Buy Power Generators on our NEW Amazon Webstore. Shop & Compare Generator Pricing

Truck Parts | Compare and Shop the Best Generators

Click on the Generators below to Purchase Online

Home  |  email  | 
  |  Buy Commercial Generators Online

Guardian  |  Guardian  Elite  |  QuietSource  |  Commercial  |  Specs  |  Transfer Switches   |  Pricing  |  Email

LOAD CENTER CONTROL SYSTEM SPECS New! PowerMaster GUARDIAN’s new PowerMaster™ priority load control system for our standby generators makes whole-house coverage more affordable than ever before.  If air conditioning is the top priority circuit in the system, the thermostat signals the A/C to start, then power is automatically diverted from non-critical loads so the A/C can start. When the air conditioner completes its cycle and shuts off, non-critical loads such as a water heater, electric range or well pump can continue operation. The PowerMaster can control two major loads up to 30 Amps each. For applications where more than two large, non-critical loads must be controlled, up to four PowerMaster controllers can be connected to a single generator.  For installation, the PowerMaster requires three (3) conduits:   • A line for the PowerMaster to the distribution panel to access the devicepower leads. • A control line from the central air low voltage control box to the PowerMaster  • A control line for the transfer switch to the PowerMaster

Transfer Switch and Load Center for Generac Guardian Generators A GUARDIAN transfer switch monitors utility power. When utility power is interrupted it signals the generator to start. When utility voltage returns, the transfer switch will return the electrical load from the generator back to the utility. When choosing the right transfer switch, you must look at the buildings distribution panel to determine service amperage. All transfer switches are UL Listed for safety standards. RTS-N (Single Phase) • 100/200 Amp • Includes transfer switch only • Install with subpanel or custom installs RTS-E with service disconnect (Single Phase) • 100/200 Amp • Service entrance rated • Easy and economical installation MODEL AMPS VOLTS ENCLOSURE RTS-N-100A3 100 120/240V 1ø NEMA 3R RTS-E-100A3 100 120/240V 1ø NEMA 3R RTS-N-200A3 200 120/240V 1ø NEMA 3R RTS-E-200A3 200 120/240V 1ø NEMA 3R Transfer switch configurations Model RTS-N Model RTS-E AUTOMATIC TRANSFER SWITCH NEMA 3R - INDOOR/OUTDOOR Use RTS-N models for custom installation or with installs that require a subpanel. Use RTS-E models with service disconnect for quick & easy installations. Transfer switch connects through utility meter from outside. Note: In all applications a main LOAD CENTER CONTROL SYSTEM:

Transfer Switches and Load Center for Generac Guardian Generators | Home

Copyright 2005 Bestgenerators.com   |  Legal Notices

Enter your search terms Submit search form

Call Toll Free 1-800-931-0552 - Out of Country: 720-322-0500